Xerox Phaser 6120, Руководство пользователя

Страница: 55 / 174

Media Types 48
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these
layered regions may be lost or faded.
"
43 lb. bond is also referred to as 90 lb. index stock.
Use envelopes that are
„
Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
"
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
„
Approved for laser printing
„
Dry
DO NOT use envelopes that have
„
Sticky flaps
„
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for
sealing
„
Transparent windows
„
Too rough of a surface
„
Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
„
Been presealed
Capacity Tray 1 Up to 10 envelopes, depending on
their thickness
Tray 2 Not supported
Orientation Face up
Driver Media Type Envelope
Weight Base material up to 90 g/m² (24 lb. bond)
Duplexing Not supported