Xerox Phaser 6115 MFP, Руководство по обслуживанию

Страница: 421 / 532

Phaser 6115MFP Multifunction Product Service Manual 9-3
Parts Lists
Using the Parts List
Only those parts listed with part numbers are available for order. Parts listed
without a corresponding part number are only available as part of a parent
assembly.
■
No.: The callout number from the exploded part diagram.
■
Part Number: The material part number used to order that specific part.
■
Name/Description: The name of the part to be ordered and the number
of parts supplied per order.
■
Parts identified throughout this manual are referenced PL#.#.#; For
example, PL3.1.10 means the part is item 10 of Parts List 3.1.
Note
The spares list for this product is limited, Therefore, not all
disassembly procedures have an associated PL number. The
procedures without a part number are necessary to reach other parts
that do have PL number.
■
A black triangle preceding a number followed by a parenthetical statement
in an illustrated parts list means the item is a parent assembly, made up of
the individual parts called out in parentheses.
■
The notation “with X~Y” following a part name indicates an assembly that
is made up of components X through Y. For example, “1 (with 2~4)”
means part 1 consists of part 2, part 3, and part 4.
■
An asterisk (*) following a part name indicates the page contains a note
about this part.
■
The notation (NS) next to a part indicates that particular part is not
spared, but contained in a kit or major assembly.
■
The notation “J1<>J2 and P2” is attached to a wire harness. It indicates
that connector Jack 1 is attached to one end of the wire harness and
connector J2 is attached to the other end that is plugged into P2.
Abbreviations
Abbreviation Meaning
C C-ring
E E-ring
KL K-clip
S Screw