Xerox Phaser 6115 MFP, Руководство по обслуживанию

Страница: 216 / 532

6-20 Phaser 6115MFP Multifunction Product Service Manual
Adjustments and Print Function Settings
5. The test pattern 1 should be positioned vertically. Use A4 or Letter paper
loaded into tray1 to make the test copy.
■
Check the amount that widths A and B in the copy of the test pattern
are shifted.
■
If the shift is out of specification, adjust it according to the following
procedure.
■
Press the Menu Select key.
■
Using the ../.. key, change the setting value and then press the Menu
Select key.
■
Place the test pattern 1 into the Automatic Document Feeder. Then,
make a test copy again and check it.
■
If the width of A is less than the width of B..... Increase the setting.
■
If the width of B is less than the width of A..... Decrease the setting.
ADF Sub Regist
Function:
To adjust for variations in the accuracy of all parts and their mounting
accuracy by varying the scanning start position in the sub-scanning direction
when using the Automatic Document Feeder.
Use:
When the original glass is replaced, or when a new Auto Document Feeder
Unit is mounted.
Note
After the [PRN MAIN REGIST] and [PRN SUB REGIST] and [CCD SUB
ZOOM] adjustments have been performed
After the [ADF SUB ZOOM] adjustments have been performed, refer to the
Adjustment Range section of the Auto Document Feeder Unit.
DMAX (Manufacturing Only)
Function:
To adjust the density of each color.
1st Transfer Voltage (Manufacturing Only)
Function:
To adjust the voltage applied to the Transfer Roller for each color.