Printer Settings
Phaser™ 4500 Laser Printer
1-14
Printing the Startup Page
To print the “Startup Page”:
1.
Select
Information
, then press the
OK
button.
2.
Select
Information Pages
, then press the
OK
button.
3.
Select
Startup Page
, then press the
OK
button to print.
Accessing Power Saver
To save energy, the printer enters a Power Saver, low-energy consumption mode after a pre-
defined period of time since its last activity. In this mode, most printer electrical systems are
shut down. When a print job is sent to the printer, the printer enters Warmup Mode. You can
also warm up the printer by pressing the
OK
button on the front panel.
If you find that the printer is going into Power Saver mode too often and you do not want to
wait while the printer warms up, increase the length of time before the printer goes into Power
Saver mode. Change the timeout value as follows:
1.
At the printer’s front panel, select
Printer Setup
, then press the
OK
button.
2.
Select
Printer Controls
, then press the
OK
button.
3.
Select
Power Saver Timeout
, then press the
OK
button.
4.
Press the
Down Arrow
or
Up Arrow
button to scroll to a selected Power Saver timeout
value. Select a larger value if you want to extend the length of time before the printer goes
into Power Saver mode.
5.
Press the
OK
button.
Preventing Access to Front Panel Settings
Using CentereWare IS
To set front panel menu preferences:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Select
Properties
.
4.
Select the
General
folder on the left sidebar.
5.
Select
Printer Defaults
.
6.
Select
On
or
Off
from the
Front Panel Menu
drop-down list
.
■
Select
On
to have all menus available.
■
Select
Off
to limit the printer setup items.
To prevent access to front panel settings, you can lock the front panel
settings from CentreWare IS. A lock icon appears next to items in the front
panel that cannot be accessed by users.
