
Macintosh
Phaser™ 4500 Laser Printer
3-34
Creating a Rendezvous Printer with Mac OS X, Version 10.2 or Higher
1.
Open the
Print Center
utility (located in
Utilities
in the
Applications
Directory).
2.
Click
Add
.
A list appears displaying your printer’s name, followed by a series of numbers. For
example,
Your Printer’s Name xx:xx:xx
. Each numbered segment represents the last
section of your printer’s hardware address. Your PPD is automatically selected.
3.
Click
Add
to complete the installation.
Macintosh Troubleshooting (Mac OS 9.x, Mac OS X, Versions
10.1 and 10.2)
The following procedure eliminates cabling, communication, and connection problems. Once
you complete these steps, print a test page from your software application. If the job prints, no
further system troubleshooting is necessary. If there are print quality problems, go to
Reference/Troubleshooting
on the
User Documentation CD-ROM
.
Macintosh Troubleshooting Step-By-Step
Mac OS 9.x
Perform these steps
only
for Mac OS 9:
1.
Open the
Chooser
, then click the
LaserWriter
driver.
2.
Do one of the following:
■
If the printer name appears, your printer is communicating through the network. You
do not need to perform any additional steps.
■
If your printer name does not appear, proceed to Step 3.
3.
Verify that the printer is plugged in, turned on, and connected to an active network.
4.
Verify the cable connection from the network to the printer.
5.
Follow these steps:
a.
From the printer’s front panel, verify that
EtherTalk
is enabled. If it is not, enable it in
the front panel, then reset the printer.
b.
Print the “Configuration Page” and verify that
EtherTalk
is enabled.
c.
From the “Configuration Page”, verify the
Zone
. If you have multiple zones on your
network, verify that your printer appears in the desired zone.
6.
If you are still unable to print, go to
www.xerox.com/office/support
or access
PhaserSMART Technical Support through CentreWare Internet Services:
a.
Launch your web browser.
b.
Enter your printer's IP address in the browser’s
Address
field (http://
xxx.xxx.xxx.xxx).
c.
Select
Support
.
d.
Click the
PhaserSMART Diagnostic Tool
link to access PhaserSMART.