Print-Quality Problems
Phaser™ 4500 Laser Printer
4-29
Repeating Defects
Refer to the table below if you observe a repeating defect, appearing multiple times at regular
intervals on the page, on your print jobs.
Different supplies may create print defects with similar measurements. To identify the faulty
supply:
1.
Replace the print cartridge (do not discard the packaging).
2.
If the problem continues, then remove and repackage the new print cartridge.
3.
Reinstall the original print cartridge, then replace the maintenance kit (fuser and transfer
roller).
4.
If the problem continues, contact your Customer Support Center.
Recurring Marks, Spots, Lines, or Voids
Replace this Supply...
if the defect occurs every:
Print Cartridge
38 mm (1.5 in.)
52 mm (2.0 in.)
94.4 mm (3.72 in.)
Transfer Roller
51 mm (2.0 in.)
Fuser
94.2 mm (3.7 in.)