Windows 98 and Windows Me
Phaser™ 4500 Laser Printer
3-26
Quick CD-ROM Install Steps
1.
Insert the
Printer Installer and Utilities CD-ROM
into the computer’s CD-ROM drive. If
your PC is set to autorun, the installer launches automatically. If it does not launch, do the
following:
a.
Click
Start
, then click
Run
.
b.
In the Run window, type:
<CD drive>:\INSTALL.EXE
.
2.
Select your desired language from the list.
3.
Select
Install
Printer Driver
.
4.
Click
I Agree
to accept the Xerox Software License Agreement.
5.
In the Select Printer dialog box, the default
Use
Walk-Up Technology (recommended
for network printers)
is selected. Click
Next
.
6.
Follow the
Use Walk-Up Technology
instructions displayed.
7.
Click
Exit Program
.
Note
If the Walk-Up Technology dialog box remains onscreen after you have completed
Steps 1–6, click the
Back
button, then click
Select from the following discovered
printers
. Follow the onscreen prompts to complete the installation procedure.
Other Methods of Installation
Install your printer on a Windows 98 or Windows Me network using one of these methods:
■
Xerox TCP/IP Port Monitor
■
PhaserPort Software
Xerox TCP/IP Port Monitor
The Windows installer installs the Xerox TCP/IP Port Monitor. The Xerox TCP/IP Port
Monitor can be used to add or remove TCP/IP ports.
Adding a Port
1.
Open
Printer Properties
for the printer you would like to attach to the new TCP/IP port.
2.
Click
Start
, click
Settings
, then click
Printers
.
3.
Right-click the printer to be attached to the new TCP/IP port, then click
Properties
.
4.
Click the
Details
tab, then click the
Add Port
button.
5.
Select
Other
.
6.
From the list of available printer-port monitors, select the
Xerox TCP/IP Port
, then click
OK
.
