Error Troubleshooting
Xerox Internal Use Only
Phaser 3320 and WorkCentre 3315/3325
Service Manual
2-25
20-410
Line Error
There is an error with Fax
data reception.
The machine cannot connect
with the remote machine, or
has lost contact because of a
problem with the phone line.
Try again. If failure
persists, wait an hour or so
for the line to clear then
try again.
20-500
Memory Full
The memory has become
full.
Either delete unnecessary
documents, or retransmit
after more memory
becomes available, or split
the transmission into
more than one operation.
20-550
Memory Full
Available Fax Memory is
getting low.
Fax Memory is almost full.
Print or remove received
fax Job.
20-600
No answer.
When the machine could not
connect to the remote
machine after Completion of
redial up to redial counter in
system data.
The remote machine did not
answer after all the redial
attempts.
Try again. Make sure the
remote machine is OK.
20-700
No assigned
The speed dial location you
tried to use has no number
assigned to it.
Dial the number manually
with the keypad, or assign
the number.
20-900
Retry Redial
The machine is waiting for
the programmed interval to
automatically redial.
Press
Start
to immediately
redial, or
Stop
to cancel
the redial operation.
Error
Error Message
Cause
Initial Action
Go To
