Xerox FS-C8008DN, Руководство по эксплуатации

Страница: 80 / 214

3.5 Changing the Interface Parameters
3-35
8 88 8
Press the
U
or
V
key to scroll through the following communication modes:
Nibble (high)
Auto
Normal
High Speed
9 99 9
When the desired communication mode is displayed, press the
ENTER
key.
10 10 10 10
Press the
MENU
key to exit the menu selection.
3.5.2 Changing Serial Interface Parameters
Note
This section applies to the printers having the option serial interface board kit (IB-11)
installed.
You can confirm or change the serial interface parameters including baud rate, data bits,
stop bits, parity, and protocol. These parameters must match those of the computer’s serial
interface.
1 11 1
Press the
MENU
key.
2 22 2
Press the
U
or
V
key repeatedly until Interface > appears.
3
33
3
If the interface is other than serial, press the
ENTER
key. A blinking question mark
( ? ) appears.
4 44 4
Press the
U
or
V
key repeatedly until
Serial
appears.
5 55 5
Press the
ENTER
key again.
6 66 6
Press the
Z
key. One of the following serial parameters is indicated (
Baud rate
for example).
Interface
? Parallel
Interface
? Serial