3.13 Other Modes
3-91
Sleep Timer Timeout Time
You can adjust the timer timeout time, the length of time the printer waits before entering
sleeping mode in the absence of data. The default sleep timer timeout time is 30 minutes.
The printer reverts to normal operation mode when the printer receives a print job, the
operator panel is operated, or one of the exterior covers is opened.
Note
Color calibration is automatically executed before the printer reverts to normal
operation mode.
To confirm and change the timeout time, proceed as follows:
1
11
1
Press the
MENU
key.
2
22
2
Press the
U
or
V
key repeatedly until
Others >
appears.
3
33
3
Press the
Z
key.
4
44
4
Press the
U
or
V
key repeatedly until
>Sleep Timer >
appears.
5
55
5
To change the timeout time, press the
ENTER
key. A blinking cursor (
_
) appears.
6
66
6
Press the
U
or
V
key to increase or decrease the value at the blinking cursor and set
the desired time. The timer can be set between
5
and
240
min, in 5-minute
increments. Use the
Z
and
Y
keys to move the cursor right and left.
7
77
7
When the desired timeout time is displayed, press the
ENTER
key.
8
88
8
To exit the menu selection, press the
MENU
key.
Others >
>Sleep Timer >
030min.
>Sleep Timer
030min.
Содержание FS-C8008DN
Страница 1: ...FS C8008N FS C8008DN Operation Guide Color Laser Printer FS C8008N FS C8008N ...
Страница 61: ...3 3 Menu Map and Status Pages 3 16 Figure 3 3 MENU MAP FS C8008N Page Printer ...
Страница 179: ...5 3 Cleaning the Printer 5 11 6 6 6 6 Close the front cover Figure 5 15 Front Cover ...
Страница 207: ...Appendix C Technical Specifications The technical specification may be changed for improvement purpose ...