![background image](http://html1.mh-extra.com/html/xerox/ex-570/ex-570_configuration-and-setup_884989032.webp)
S
ETTING
UP
FROM
A
C
LIENT
C
OMPUTER
32
T
O
ACCESS
C
ONFIGURE
FROM
C
OMMAND
W
ORK
S
TATION
1 In Command WorkStation, as Administrator, do one of the following:
• In the Server menu, click Configure.
• In Device Center, on the General or Users tabs, click Configure.
2 If the Fiery Setup dialog box displays, click Configure.
If you have not completed initial setup, you may want to click Fiery Setup Wizard instead.
For more information, see
If you use the Fiery Setup Wizard (from Command WorkStation or WebTools) and click
Finish at the end of the wizard, the Fiery Setup dialog box does not display again in any
location.
About Fiery Setup Wizard
Fiery Setup Wizard guides the initial setup to configure the EX/i Print Server for the print
environment.
Fiery Setup Wizard is only available for initial setup and when you reinstall system software. If
you use the Fiery Setup Wizard (from Command WorkStation or WebTools) and click Finish
at the end of the wizard, the Fiery Setup dialog box does not display again in any location.
The Fiery Setup Wizard guides you through the following procedure:
1 Choose a default language.
2 Specify regional settings.
3 Specify server settings.
4 Choose a print environment configuration.
A print environment configuration contains standard setup options for a particular print
environment. You can choose from one of the following configurations that best fit your print
environment:
• Graphic Arts & Proofing
• Office & Workgroup
• Production
• Transactional
You can also choose to use EX/i Print Server factory default settings for your print
environment instead of choosing a print environment configuration.
5 Configure setup options for a chosen print environment.
After completing Fiery Setup Wizard, you can make additional changes to the EX/i Print
Server in Configure.