Xerox DocuPrint P12, Руководство пользователя

Страница: 120 / 178

DOS Utilities
•
111
7-2
DOS Status Monitor
The DOS Status Monitor is a memory-resident (TSR) program that can
pop up in DOS programs giving you real-time feedback on Xerox
DocuPrint P12 status as well as enabling you to pause/continue printing,
reset the printer, or eject a page. The amount of status information
displayed depends on whether the bi-directional communication with the
printer is enabled.
7-2-1 Using the Status Monitor
To load the DOS Status Monitor, type XC12SM and press Enter at the
DOS prompt. The DOS Status Monitor is invoked by pressing a hot-key
combination. The default is Ctrl-Alt-S. You can see the name of the
printer, the printer port it is connected to, and its current status on the
upper portion of this status monitor.
☞
☞ ☞
☞
7-1-6 Change Status Monitor settings menu
Below the printer status information area, the printer control options are
indicated. To access an option, type its letter as indicated on the
screen.
◆
P - Pause Printing
Pressing
P during printing will stop further printing after the current
page has been printed. If no print data is received by the printer
when you press
P , the printer goes off-line until C is pressed. This
option will not be displayed on the DOS Status Monitor if no bi-
directional connection exists.
◆
C - Continue Printing
When printing is paused, or when the printer is waiting for some
action from you, pressing
C resumes the print job. This option will
not be displayed on the DOS Status Monitor if no bi-directional
connection exists.