Xerox DocuPrint C1190 FS, Руководство пользователя

Страница: 20 / 233

Safety Notes
1-8
Laser Safety
CAUTION: Any operations or adjustments not stated in the operation manual may cause hazardous
light exposure and eventually burn injuries or loss of eyesight.
This product has been tested and found to comply with the Class 1 Laser Equipment requirements
defined by the international standard IEC60825 and has no light exposure hazard. The product has
no hazardous light emission as it features light protection components and covers to shut in all light
beam during operation and maintenance.
Always follow all warning instructions marked on or supplied with this product.
To avoid the risk of burn injuries and electric shock, never touch the area with the “High
Temperature” or “High Voltage” marks on.
Keep electrical and mechanical safety interlocks active. Keep the safety interlocks away from
magnetic materials. Magnetic materials may accidentally activate the product and cause injuries or
electric shock.
A ground fault interrupter is embedded in this product. If current leakage occurs, the ground fault
interrupter automatically cuts off power circuit to prevent electric shock and a fire accident. The
ground fault interrupter is normally ON [(indicated as “|”)]. Check once a month if the ground fault
interrupter works properly in accordance with the following procedures:
1. Switch off the product.
2. Press the <TEST> button located on the rear right side of the product, with a thin stick or similar
object.
3. Make sure that the <RESET> button is popped up.
4. After the confirmation, press the <RESET> button to exit the test mode.
If the circuit does not work properly, contact your local Fuji Xerox representative.
Do not attempt to remove a paper jammed deeply inside the product, particularly a paper wrapped
around a fuser or a heat roller. Otherwise, it may cause injuries or burns. Switch off the product
promptly and contact your local Fuji Xerox representative.
Do not apply excessive force to hold thick document on the document glass. It may break the glass
and cause injuries.
To move this product to another location, contact your local Fuji Xerox representative.
RESET button
TEST button