Description of Menu Items
9-15
■
Clean Developer
: Stirs the toner in a new toner cartridge. Select
Yes
when the toner needs stirring.
The default setting is No.
■
Toner Refresh
: Cleans the toner in the toner cartridge.
■
Yellow:
Select
Yes
when the yellow toner cartridge needs cleaning. The default setting is No.
■
Magenta:
Select
Yes
when the magenta toner cartridge needs cleaning. The default setting is No.
■
Cyan:
Select
Yes
when the cyan toner cartridge needs cleaning. The default setting is No.
■
Black:
Select
Yes
when the black toner cartridge needs cleaning. The default setting is No.
■
Drum Refresh:
Cleans the surface of the PHD unit.
■
Yes
: Select this when the surface of the PHD unit needs cleaning.
■
No
: (default)
■
Initialize NVM
: Initializes the settings stored in the NVM except for the network settings. The NVM
is a nonvolatile memory that stores the printer settings even after the power is turned off. After
executing this function and restarting the printer, all the menu parameters are reset to their default
values.
■
You cannot initialize the NVM during printing.
■
You need to restart the printer to activate this setting. After making the setting, turn off the printer,
and then turn it on again.
■
Init PrintMeter
: Initializes the print meter.
■
Reset Fuser
: Resets the counter reading after installing a new fuser.
■
Yes
: Select this to reset the counter reading after installing a new fuser.
■
No
: (default)
■
Custom:
Specifies whether to use non-genuine print cartridges.
■
Off
: (default)
■
On
Important:
•Toner not recommended by Fuji Xerox may seriously damage the printer. Damage caused by such
toner may not be covered by your warranty.
•Unless all the copy jobs that are stored in the printer are completed, this setting cannot be changed.
■
Adjust Altitude:
The altitude of the location where the machine is installed affects the performance of
the printer. Specify the altitude.
■
0 m
: (default)
■
1000 m
■
2000 m
■
3000 m
Secure Settings
Use the Secure Settings menu to set a password to limit access to the menus.
■
Panel Lock
: When enabled, access to the Admin Menu requires a password.
■
Service Lock
: When enabled, access to the scanner and fax requires a password.
Panel Lock
must be
enabled before enabling
Scan Lock and Fax Lock
.
■
Secure Receive
: When enabled, incoming faxes require a password to print them.
Panel Lock
must be
enabled before enabling
Secure Receive Lock
.
Содержание DocuPrint C1190 FS
Страница 1: ...User Guide DocuPrint C1190 FS...
Страница 96: ...6 1 This chapter includes Basic Copying on page 6 2 Adjusting Copying Options on page 6 3 Copying 6...
Страница 174: ...Paper Jams 10 11 c Close the ADF cover...
Страница 233: ...DocuPrint C1190 FS User Guide ME4326E2 1 Edition 1 December 2008 Fuji Xerox Co Ltd Copyright 2008 by Fuji Xerox Co Ltd...
