Xerox DocuPrint C1190 FS, Руководство пользователя

Страница: 177 / 233

Print Quality
10-14
Blank pages Two or more sheets may be feeding at once.
Remove the paper stack from the tray, fan it, and reinsert it.
The print cartridges are not genuine print cartridges.
Verify that the print cartridges (C/M/Y/K) are genuine cartridges, and replace if
necessary.
The transfer unit is old or damaged.
Replace the transfer unit.
The high-voltage supply is defective.
contact the Fuji Xerox local representative office or an authorised dealer.
Hair-like marks appear in
or around black halftone
printing. / Shadows appear
around areas of dense
black printing The paper was left unwrapped for a long time (especially in a dry environment).
Replace the paper with the one properly stored. See
Paper Storage Guidelines on
page 5-5.
The paper is outside the recommended specification range.
Replace the paper with a recommended size and type, and confirm that your print
driver settings are correct. See
About Paper on page 5-6.
The transfer unit is old or damaged.
Replace the transfer unit.
Color around the edge of
printing is incorrect The color calibration is incorrect.
Adjust the color. See
Color Calibration on page 10-17.
Colored dots are printed at
regular intervals (about 70
mm) The drum cartridge is dirty.
Clean the print cartridge.
Partial blanks, creased
paper, or blotted printing The paper is damp.
Replace the paper with the one properly stored. See
Paper Usage Guidelines on
page 5-3.
The paper is outside the recommended specification range.
Replace the paper with a recommended size and type. See
About Paper on
page 5-6.
The transfer unit, or fuser, is not installed correctly.
Reinstall the transfer unit and/or fuser.
The print cartridges are not genuine print cartridges.
Verify that the print cartridges (C/M/Y/K) are genuine cartridges, and replace if
necessary.
Condensation inside the printer causes partial blanks or creased paper.
Turn the printer on, and leave it on, for at least one hour to get rid of the
condensation. If the problems still occurs, contact the Fuji Xerox local representative
office or an authorised dealer.
Symptom Reason/Action