Problems With the Printer
10-22
Paper cannot be fed.
Paper jams.
Multiple paper are fed.
Paper is fed at an angle.
Paper is wrinkled.
Is the paper correctly loaded?
Load the paper correctly. For labels, transparencies, or envelopes, fan them well to
allow air to enter between each sheet before loading. See
Is the paper damp?
Replace with paper from a new ream. See
The paper used is not suitable.
Load the correct type of paper. See
Is the paper tray set correctly?
Push the paper tray completely into the printer.
Is the printer placed on a flat location?
Place the printer on a stable flat surface.
Are the paper tray guides set in the correct positions?
Set the guides to the correct positions. See
Paper is fed more than 1 sheet at a time.
Multiple feeding of paper may occur before the sheets of paper loaded in the tray are
used up. Remove the paper, fan it, and load again. Replenish paper only when all the
sheets of the paper loaded are used up.
Unusual noises
The printer is not level.
Reposition the printer on a flat, stable surface.
The paper tray is not inserted properly.
Push the paper tray completely into the printer.
There is a foreign object inside the printer.
Turn off the printer and remove the foreign object. contact the Fuji Xerox local
representative office or an authorised dealer.
Symptom
Reason/Action
Содержание DocuPrint C1190 FS
Страница 1: ...User Guide DocuPrint C1190 FS...
Страница 96: ...6 1 This chapter includes Basic Copying on page 6 2 Adjusting Copying Options on page 6 3 Copying 6...
Страница 174: ...Paper Jams 10 11 c Close the ADF cover...
Страница 233: ...DocuPrint C1190 FS User Guide ME4326E2 1 Edition 1 December 2008 Fuji Xerox Co Ltd Copyright 2008 by Fuji Xerox Co Ltd...