Xerox DocuPrint 4517, Руководство пользователя

Страница: 21 / 288

D o c u P r i n t 4 5 1 7 Q u i c k T o u r
C h a p t e r 1 : D o c u P r i n t 4 5 1 7 Q u i c k T o u r
❖
1-13
Maintaining
the Printer
Maintaining the printer in good operating condition is
essential to having a reliable, well-running machine.
Cleaning the
Printer
For optimum performance, do not place the printer near vents
or dust-producing equipment. Particles in the air may enter
the printer and cause failures in internal mechanisms.
For best results, clean the outside of the printer with a damp
cloth. Power the printer off before cleaning. Do not use
detergents.
Replacing the
EP Cartridge
An EP (electronic printing) cartridge will print approximately
10,000 pages of A4 or 8.5 x 11 paper under average operating
conditions (5% image area coverage). The number of prints
per cartridge will decrease if you routinely:
• Print dense text and graphics.
• Set Print Density (in the System Menu) to a dark setting.
• Exceed five percent area coverage.
You may increase the number of prints per cartridge by
setting Print Quality to Toner Saving . The printer
automatically reduces the amount of toner used (and prints a
lower density output). See Chapter 3: Using the Control Panel
for instructions on changing Control Panel settings.
Replace the EP cartridge when you see the following
message at the printer’s Control Panel display:
Toner Low
Although you can print for a short time after this message first
appears, to ensure optimum print quality you should replace
the EP cartridge as soon as possible.
See Appendix A: Ordering Printer Options for ordering a new
EP cartridge.
chapter1.frm Page 13 Friday, July 11, 1997 8:12 PM