Xerox DocuPrint 4517, Руководство пользователя

Страница: 264 / 288

D o c u P r i n t 4 5 1 7 U n i q u e P r i n t e r C o m m a n d s
G-2
❖
D o c u P r i n t 4 5 1 7
/
4 5 1 7 m p U s e r G u i d e
Overview
In addition to the standard PCL printer commands, Xerox has
added some unique settings for the DocuPrint 4517 in the
following areas:
• Paper Size
Values are added for the “#” parameter in the PCL Page
Size command. See the section “Paper Size” (page G-3).
• Paper Source Selection
Additional values are added for the standard PCL paper
source command. See the section “Paper Source
Selection” (page G-5).
• Output Trays
Additional values are added for the standard PCL
destination command. See the section “Output Trays”
(page G-6).
• Raster Resolution
The PCL Raster Graphics Resolution command is
expanded to allow 1200 dots per inch. See the section
“Raster Resolution” (page G-7).
Note
PCL printer commands not listed in this section emulate
exactly the standard PCL commands defined in Hewlett
Packard’s HP PCL 5 Printer Language Technical Reference
Manual.
chapterg.frm Page 2 Friday, July 11, 1997 9:05 PM