Xerox DocuPrint 4517, Руководство пользователя

Страница: 251 / 288

C o n t r o l P a n e l O p t i o n s
A p p e n d i x D : C o n t r o l P a n e l O p t i o n s
❖
D-21
Stop Bits
Serial Menu
2
1.5
1*
Sets the number of stop bits in each character. (Stop bits signal the end of a
character.)
Subnet Mask
†
Ethernet Menu
Token Ring Menu
0.0.0.0 - 255.255.255.255
†
Appears only in V2.0 or
greater.
Sets the Subnet Mask of the printer for network communications.
Each byte of the address is set in turn.
Press Escape to go back to the previous byte. If on the first byte, pressing
Escape goes back to the previous menu.
Press Enter to advance to the next byte. If on the final byte, pressing
Enter accepts the new setting of the entire address.
Hold Up or Down for approximately two seconds and the byte scrolls in
increments of 10.
The Subnet Mask is automatically computed by the XNIC after the IP Address has
been “*saved*”. You can redefine a permanent Subnet Mask, through this
Control Panel option. Once you have done this, the XNIC will no longer
automatically computer the value. The default is “none.”
Table D.1 Control Panel menu options, settings, and descriptions (continued)
Menu Option,
Location(s),
Setting(s)
Description
Table D.1 Page 19 of 21
chapterd.frm Page 21 Friday, July 11, 1997 10:19 PM