Start Here
1
Take everything out of the box.
2
Remove all the tape and packing material inside and around the printer.
The tape may be in different places on your printer, so check carefully.
3
Slide the paper
support into the
grooves as shown.
It should fit securely.
4
Plug in the printer and
press the
power
button until the green
light comes on.
5
Lower the output tray and open the cover.
6
Shake the package of ink cartridges
4 or 5 times. Then remove the cartridges
from the package.
Unpack and
Set Up the Printer
Turn over
1
Follow the appropriate instructions below to install the software if you
have a wireless access point or AirPort Base Station. If you don’t, see your
Setup and Installation
book.
Windows
®
1
Make sure the wireless mode for your computer is set to Infrastructure
and WEP encryption is disabled.
For instructions, see the documentation for your wireless adapter.
2
Insert your printer software CD-ROM.
3
Double-click
Install EPSON
Stylus C82WN Printer Driver
and follow the instructions
on the screen.
4
When you see this window, click
Stop searching
. Then follow the
instructions on the screen to finish
installing and register your printer.
Note:
The
Stop Searching
button
may take a minute or two to appear.
5
Double-click
Install EPSON Status Monitor
on the EPSON
Installation Program screen and wait while the files are copied.
6
Double-click
Install EPSON Printer Information Center
and
follow the on-screen instructions to install the information center.
7
Double-click
Install EpsonNet Wireless Print Server Utilities
.
8
If you see this message click
Continue
.
Caution:
You must install the
Java Runtime Environment if it’s
not already installed on your computer.
9
When you see the license agreement, read it and
click
Yes
to continue. Follow the instructions on the screen.
Install the Software
2
continue
7
Insert each cartridge into its holder
and push it into place.
Note:
Don’t remove the cartridge labels,
or ink may leak.
8
Press the
ink button and close the
printer cover. Wait while the ink charges.
Caution:
Don’t turn off the printer while the green light is flashing, unless
the printer hasn’t moved or made any noise for more than 5 minutes.
9
Place paper against the right edge
of the sheet feeder, then slide the
edge guide against the paper.
10
Pull out the output tray extensions.
To check the printer, first turn it off. Then hold
down the
paper button as you press and
release the
power button to turn it back on.
The test page prints.
If the test page doesn’t print, see the “Problem Solving” chapter
in
Printer Basics
.
10
When you see this window
select
Program Files
and
WP-Admin
and click
Next
.
You see the Wireless
Server Search Window.
Continue with the instructions in section 3, “Connect the Print Server.”
Macintosh
®
1
Before you begin, do the following:
•
Make sure that AirPort is on and that both AppleTalk
®
and
TCP/ IP are enabled.
•
Select a working connection to an AirPort Base Station or to an
access point.
•
Make sure that WEP encryption is disabled on your wireless network.
For details, see your AirPort or Macintosh documentation.
2
Insert your printer software CD-ROM.
3
Mac
®
OS X:
Double-click the
EPSON
CD-ROM icon to open it,
then double-click the
Software for OS X
folder. Double-click the
C82Series
icon, and enter your administrator password, if necessary.
Mac OS 8.6 to 9.x:
Double-click the
Software for OS 8.6-9.x
f
older
in the EPSON window (you may have to double-click the
EPSON
CD-ROM icon on your desktop to open the window). Double-click the
Printer Driver Installer
folder, then double-click the
Stylus C82WN
Installer
icon.
4
Click
Continue
.
5
Follow the instructions on the screen to install the printer driver and
restart your Macintosh.
6
If necessary, double-click the
EPSON
CD-ROM icon to open your
EPSON window.
7
Do one of the following:
Mac OS X:
Double-click the
Software for OS X
folder if necessary,
then double-click the
Printer Information Center
icon. Follow the
on-screen instructions to install the information center.
Mac OS 8.6 to 9.x:
Double-click the
Software for OS 8.6-9.x
folder,
then double-click the
Printer Information Center
folder. Double-click
the
Printer Information Center
icon and follow the on-screen
instructions to install the information center.
8
Do one of the following:
Mac OS X:
Double-click the
Wireless Utility Installer
icon.
Mac OS 8.6 to 9.x:
Double-click the
Install
Wireless Utility
folder, then
double-click the
Wireless
Utility Installer
icon.
You see the print server
install window:
9
Click
Next
.
10
Read the license agreement. Click
Next
to accept the agreement
and continue.
11
Follow the instructions on the
screen to install WP-Admin.
At the last screen, click
Done
.
You see the Wireless Server
Search window.
Continue with the instructions in section 3, “Connect the Print Server”.
EPSON Stylus
®
C82WN
Paper support
Ink
cartridges
Print server
power supply
Parallel cable
Print server base
Print server
Printer Basics
Printer software
CD-ROM
Setup and
Installation
Printer
Power
button
continue
3
Connect the Print Server
1
Slide the print server into the base and press firmly.
2
Turn off the printer. Then connect the parallel cable to the printer
and print server.
3
Connect the power supply to the print server and plug in the AC
adapter. Both the green and yellow lights come on and then go out.
4
Turn on the printer.
5
To test the connection, press the test button for one second
and release it. The status page prints.
If the status page doesn’t print, or it indicates that zero bytes were
transmitted or received, check the solutions under “Problems?”
on the back of this sheet.
Test button
Follow these instructions if you’re an advanced user and your network has a
wireless access point or AirPort
TM
Base Station. This includes wired networks
that have wireless access points. For more detailed instructions, see your
Setup and Installation
book.