Xerox Document Centre 505 Series, Руководство пользователя

Страница: 78 / 269

62
"
4.3 Configuring the Printer Drivers
Punch Position
Specify the punch position around the paper edge which can be used for punching:
• None (default)
• Top
• Bottom
• Left
• Right
The following paper size/orientation can be used for punching.
(long edge) or (short edge) is the edge of the paper which can be punched.
The punch positions available for selection may differ according to the document
image orientation specified on the printer driver screen. Specify the document image
orientation first before selecting the punch position.
• B5 portrait (long edge)
• A4 portrait (long edge)
• B4 (short edge)
• A3 (short edge)
• 8.5 × 11" portrait (long edge)
• 11 × 17" (short edge)
• For A4, A5, B5, 8.5 × 11", the positions that can be stapled and punched
may differ according to the paper orientation. When specifying the staple/
punch positions, take note of the orientation of the paper loaded in the tray.
• If you specify positions that cannot be stapled or punched for paper loaded
in the Multi-Tray, the printing may not be done correctly.
• You cannot specify stapling or punching for documents that are of different
paper sizes.
• You cannot specify stapling or punching for paper loaded in the bypass tray.