Xerox Document Centre 505 Series, Руководство пользователя

Страница: 208 / 269

192
Menu Item Description
Port Settings > Items:
IPP • Port Status
Define the setting of the IPP port when the power is on.
Available options: Disable*, Enable.
The note items at the end of this tabulation of print/mode settings.
• Print Mode
Sets the print mode.
Available option: Auto*, PCL, PostScript.
• PJL Switch
Sets the PJL commands sent from the host device to valid or invalid.
Available options: Off, On*.
• TBCP Filter
Define the setting of the TBCP Filter when the optional PostScript software kit
is installed.
Available options: Disable*, Enable.
• Access Control
Available options: Disable*, Enable.
• DNS
Available options: Disable*, Enable.
• Add Port Number
Available options: 80, 0, 8,000 - 8,999 (in increments of 1 unit)
• Connection Time-Out
Available options: 0 - 65,535 sec (in increments of 1 sec)
Memory Changes Items:
• Parallel Receive Buffer
• NetWare Receive Buffer
• AppleTalk Receive Buffer
Sets the memory capacity of the receive buffer for the respective interfaces.
Receive buffer is the temporary storage location of the data sent from the PC.
The memory capacity of the buffer can be changed according to the status and
objective of the usage. The increase of memory capacity for the buffer can
speed up the release of the host device of each interface.
Available memory capacity: 64 KB - 1024 KB in increments of 32 KB (256 KB*).
The maximum memory capacity may change according to the free memory
space.
• LPD Spool
• SMB Spool
Sets the memory capacity of the LPD Spool and SMB Spool.
There are three parts of the LPD Spool and SMB Spool:
(1) Off (non-spool mode)
During LPD processing from a PC, data from other PCs cannot be received.
There is a receive buffer meant for LPD use.
Available memory capacity: 64 KB - 1024 KB in increments of 32 KB (256 KB*).
The maximum memory capacity may change according to the free memory
space.
13.2 System/Meter Settings
* factory setting