Xerox Document centre 250 series Скачать руководство пользователя страница 133

Страница: 133 / 185

Troubleshooting

7.2 Messages

121

Message

Cause/Treatment

Cause:

Cover # (A, B or C) is not properly closed.

Treatment:

Check for any jammed paper and then close the
cover.

Cause:

Cover D is not properly closed.

Treatment:

Check for any jammed paper and then close the
cover.

Cause:

The front cover of the finisher is not properly
closed.

Treatment:

Close the front cover properly.

Cause:

The finisher is not properly attached to the printer.

Treatment:

Slide the finisher back to the printer.

Cause:

Paper is jammed in stacker tray * (1, 2 or 3).

Treatment:

Remove paper from the stacker tray.

Cause:

The finisher failed.

Treatment:

Press

and

together.

Cause:

The stacker tray * (1, 2 or 3) failed.

Treatment:

Press

and

together.

Cause:

This message appears if you press the Pause/
Restart button when the stacker trays are being
moved up or down.

Treatment:

Wait for the trays to stop moving.

Cause:

This message appears if you press the Pause/
Restart button to stop the Finisher operations.

Treatment:

Remove any paper from the stacker trays and
press the Pause/Restart button to resume.

*: number

#: letter (A, B, C or D)

7.2.3

Messages about staple finisher

Messages about the optional staple finisher are as follows:

Содержание Document centre 250 series


























































































































































































Результаты поиска

Содержание Document centre 250 series

Отзывы:

Похожие инструкции для Document centre 250 series

Бренды по названию

Популярные бренды

Xerox Document centre 250 series, Руководство пользователя

Результаты поиска

Содержание Document centre 250 series

Отзывы:

Похожие инструкции для Document centre 250 series

Бренды по названию

Популярные бренды