Xerox DocuColor DocuColor 4, Руководство по установке

Страница: 161 / 172

131
A
A.3 Interface Specifications
This section describes the parallel interface. (Centronics standard interface/
compliant with IEEE 1284) for the DocuColor 4 LP.
The DocuColor 4 CP uses a mini Centronics cable available from Xerox Cor-
poration. Part # 98S4330
Connector Type
The printer is fitted with an IEEE 1284-B type connector. The connector is
shown in the following diagram.
Pin Arrangement
The arrangement of the signal pins in the connector are as follows. (bi-direc-
tional communications OFF)
•
Regarding I/O, I indicates input to the printer, and O indicates output.
•
With bi-directional communications ON, the connector complies with the
IEEE 1284-B standard.
Pin No. Signal Name I/O Pin No. Signal Name I/O
1 DATASTROBE I 19 RETURN
2 DATA1 I 20 RETURN
3 DATA2 I 21 RETURN
4 DATA3 I 22 RETURN
5 DATA4 I 23 RETURN
6 DATA5 I 24 RETURN
7 DATA6 I 25 RETURN
8 DATA7 I 26 RETURN
9 DATA8 I 27 RETURN
10
A C K N O W LEDGE
O 28 RETURN
11 BUSY O 29 RETURN
12 PAPER END O 30 RETURN
13 SELECT O 31 INPUTPRIME I
14 AUTO F EED I 32 FAULT O
15 (RESERVED) 33 (RESERVED)
16 SIGN A L GND 34 (RESERVED)
17 FRAME GND 35 (RESERVED)
18 +5V O 36 SELECT IN I
36 Pin