Xerox DocuColor DocuColor 4, Руководство по установке

Страница: 120 / 172

3
90
Does the paper contain
moisture.
Check paper size
selected.
Is some paper loaded
into the paper tray
wrinked or bent?
Is the original correctly
positioned?
Is the document guide
in the automatic
document feeder
correctly aligned?
Are suitable documents
loaded into the auto-
matic document feeder?
Is paper correctly set in
the paper tray?
Is the paper tray firmly
inserted into the printer?
Is the document glass
or the automatic
document feeder dirty?
Is the document highly
transparent?
Part of the document
does not appear in the
copy output.
Feeding from MSI cut-
off copy
The copy output
becomes distorted.
The copy output is not
the desired size.
If the paper contains moisture, some part of the
document may not appear in the copy output or
some part is not clear.
Try to use paper from a paper package that has
not been opened.
See “2.3 Loading paper”
Remove the problem paper and try to use paper
from a paper package that has not been opened.
“2.3 Loading paper”
Position the original but, when copied, the image
becomes distorted.
“8.2 Positioning originals” in the User Guide.
Load paper into the automatic document feeder
correctly and gently touch the paper stack with
the document guide.
“8.2 Positioning originals” in the User Guide.
Make sure to load suitable documents into the
document feeder.
“8.1 About originals” in the User Guide.
Set paper correctly in the paper tray.
“2.3 Loading paper”
Make sure the paper tray is firmly inserted into
the printer.
“1.4.8 Replacing paper trays”
Is the document glass or the automatic document
feeder dirty?
“2.5 Cleaning”
When using highly transparent document, any
dirt on the document cover will also be copied.
Therefore, place a sheet of white paper on top of
the document before you make a copy.
3.4 Other Problems
Description Possible Cause Action