![background image](http://html2.mh-extra.com/html/xerox/docucolor-240/docucolor-240_supplementary-manual_3342022155.webp)
DocuColor 240/250
DocuColor 240/250 Training and Information Guide
155
Replacing the Waste Toner Container
This procedure shows you how to remove the used Waste Toner Container and
replace it with a new Waste Toner Container. The machine will tell you when you
need to order a new Container and when to install it.
That completes the procedure for replacing the Waste Toner Container.
1. Make sure the machine has stopped running, and open the Front Door.
2. Open the waste toner container cover, located to the right of the Area #2
lever.
3. Grip the handle of the waste toner container and pull out about half of it.
4. Hold the center part on the top of the container, and then remove it.
CAUTION: Never use a vacuum cleaner when you clean spilled toner. It can
cause explosion as the toner fills the vacuum cleaner and gets
sparks. Use a broom or a cloth moistened with a neutral detergent.
5. Hold the used waste toner container firmly with both hands and put it into
the provided plastic bag.
6. Hold the center part on the top of a new container and insert it until it
comes to a stop.
7. Close the waste toner container cover.
8. Close the Front Door.