![background image](http://html2.mh-extra.com/html/xerox/docucolor-240/docucolor-240_supplementary-manual_3342022150.webp)
DocuColor 240/250
DocuColor 240/250 Training and Information Guide
150
Consumables
Replacing the Drum Cartridges
This procedure shows you how to remove a used Drum Cartridge and replace it
with a new Drum Cartridge. The machine will tell you when you need to order a
new cartridge and when to install it. The Drum Cartridges can be recycled so
please follow the disposal instructions you receive with the new items.
CAUTION: Do not expose drum cartridges to direct sunlight or strong light
from indoor fluorescent lighting for more than two minutes. Image
quality may deteriorate when the drum cartridges are exposed to
light.
1. Replace drum cartridges while the machine is on. When the power is
turned off, all information stored to the machine's memory will be erased.
CAUTION: Do not expose drum cartridges to direct sunlight or strong light
from indoor fluorescent lighting. Do not touch or scratch the surface
of the drum. Doing so may result in unsatisfactory printing.
2. Make sure the machine has stopped, and open the Front door.
3. Pull down the R1-R4 handle.
4. Raise the Release Handle.
5. Open a bag including a new drum cartridge. Place the new drum cartridge
near the machine.
CAUTION: Do not touch or scratch the surface of the drum when you take it
out from the bag.
CAUTION: Remember to minimize the amount of time that the drum cartridge
is exposed to light. Exposure for more than two minutes may result
in light shock to the drum.
6. Unwrap the sheet covering the new drum cartridge and place it under the
cartridge. Some drum cartridges may include a protective film. Remove
the film on the drum cartridge, if it is present. Open the Drum Drawer.
7. Remove the old drum cartridge by holding the finger rings provided at the
both ends of the drum cartridge and gently lifting up.
8. Grip the finger rings provided at the both ends of the new drum cartridge.
Do not touch the surface of the drum cartridge.
9. Place the new drum cartridge in the machine following the guides with the
side marked front facing the front.
10. Press both ends of the drum cartridge to place it in a horizontal position.
11. Immediately close the Drum Drawer to protect the other drums from light.