![background image](http://html2.mh-extra.com/html/xerox/docucolor-240/docucolor-240_supplementary-manual_3342022097.webp)
DocuColor 240/250
DocuColor 240/250 Training and Information Guide
97
Paper and Media
Trays 1 and 2
Paper Trays 1 and 2 are located on the front of the machine and feed the
majority of stock sizes.
Trays 1 and 2 are identical. Each tray has a capacity of 520 sheets of 20lb paper.
The trays are pulled out by the operator for loading.
CAUTION:
A paper jam may occur if a tray is opened while it is being used to
feed stock.
The trays accommodate paper from 17lb bond to 110lb index and are fully
adjustable for all stock sizes in the range 5.5"x8.5" to 11"x17". These trays
cannot be used for envelopes or tabbed stock.
Stock can be loaded either long or short edge feed (portrait or landscape). Load
pre-formatted paper, letterhead, and pre-printed stock face down and with the top
towards the front of the machine. Load punched paper with the holes on the
leading (left) edge.
Ensure that the stock edges touch the front and left edges of the tray. The paper
guides in the trays must be adjusted so that they touch the stock. To position the
right side guide, squeeze the clamp mechanism and slide the guide to touch the
edge of the stock. To position the front and rear guides, squeeze the clamp
mechanism and slide the guide to touch the edge of the stock.