Xerox DocuColor 240 Скачать руководство пользователя страница 129

Страница: 129 / 191

DocuColor 240/250

DocuColor 240/250 Training and Information Guide

129

Paper Tray Status

Paper Tray status information is available on the Machine Status tab.

Select the Paper Tray button on the Machine Status tab to view the paper
loaded and the status of each of the paper trays.

Information about each of the trays, including the Bypass Tray, is displayed. The
paper Size, Type and Color are the attributes set when loading the trays.

The Status column relates to the current status of the paper tray. The different
paper tray status are:

•

In Use - Stock for the current job is being fed from the tray.

•

Ready - The tray is available for feeding, but is not being used for the
current job.

•

Not Ready - The tray is not ready for feeding, for example the tray is
open.

•

Faulted - The tray has an associated fault condition.

•

Empty - The tray is empty. The last size, type and color used in the tray
are displayed as the attributes.

The information displayed on the Tray Status screen is automatically updated if
the status of any tray changes.

Содержание DocuColor 240
































































































































































































Результаты поиска

Содержание DocuColor 240

Отзывы:

Бренды по названию

Популярные бренды

Xerox DocuColor 240, Дополнительное руководство

Результаты поиска

Содержание DocuColor 240

Отзывы:

Бренды по названию

Популярные бренды