![background image](http://html2.mh-extra.com/html/xerox/docucolor-240/docucolor-240_supplementary-manual_3342022154.webp)
DocuColor 240/250
DocuColor 240/250 Training and Information Guide
154
Replacing the Charge Corotron
This procedure shows you how to remove the used Charge Corotron and replace
the machine with a new Charge Corotron. The machine will tell you when you
need to order a new one and when to install it.
CAUTION: Do not expose this item to direct sunlight or strong light from indoor
fluorescent lighting. Image quality may deteriorate when these are
exposed to light for more than two minutes.
1. Make sure the machine has stopped running.
2. Open the Front Door.
3. Pull down the R1-R4 handle.
4. Raise the Release Handle.
5. Open the packaging for the new Charge Corotron and gently place the new
Charge Corotron on a flat surface near the machine.
6. Pull out the Drum Drawer.
CAUTION: Remember to minimize the amount of time that the drum cartridges
are exposed to light. Exposure for more than two minutes may
result in light shock to the drums.
7. Grasp both of the Amber-Gold colored casings on the old Charge Corotron
and push towards the back of the machine. You will hear a clicking noise
indicating that it is being released.
8. Remove the old Charge Corotron by holding the finger rings provided at the
both ends of the Charge Corotron and gently pulling straight up.
9. Gently lower the new Charge Corotron into the machine straight down, and
not at an angle.
10. Grasp the Amber-Gold colored casings on the new Charge Corotron and pull
towards the front of the machine until you hear a clicking noise to indicate the
Charge Corotron is in place.
11. Push in the Drum Drawer completely. Return the Release Handle to its
original position.
CAUTION Remember to close the Drum Drawer - Do not expose drum
cartridges to direct sunlight or strong light from indoor fluorescent
lighting. Do not touch or scratch the surface of the drum. Doing so
may result in unsatisfactory printing.
12. Return the R1-R4 handle to the original position and close the front door.
13. Insert the used Charge Corotron into an empty container for recycling.