P
AGE
2-4
X
EROX
C
OPY
C
ENTRE
/W
ORK
C
ENTRE
P
RO
32/40 C
OLOUR
Q
UICK
R
EFERENCE
G
UIDE
G
ET
T
IN
G
S
TA
RTE
D
P
OWER
O
N
OR
O
FF
...
If
Quick Power Off
is selected and confirmed, the machine will begin a controlled
power down sequence.
NOTE:
The machine remains on for approximately 30 seconds before the power is
terminated.
If there are any jobs in the queue, a second pop-up screen will appear warning that
jobs in the queue will be deleted if the machine is powered off. Confirmation of this
screen will result in the deletion of any jobs in the queue during the power down
sequence.
If
Enter Power Save
is selected and confirmed, the machine will immediately enter
Low Power Mode. If there are any jobs in the queue, a second pop-up screen is
displayed.
NOTE:
The ON/OFF switch is disabled in Low Power Mode.
To re-activate the machine when in this mode, touch a button on the touch screen
or control panel.
1
To power ON:
¾
Press the ON/OFF switch. The entire
powering up process takes less than 4
minutes. Hold the ON/OFF switch
down for 5 seconds. The lights on the
control panel will flash. It may be up to
30 seconds before you see any lights
on the control panel or screens appear
on the touch screen.
NOTE:
Certain functions of the machine,
e.g. copying, will be available before
other functions e.g. printing.
2
To power OFF:
¾
Press the ON/OFF switch. Hold
the ON/OFF switch down for 5
seconds. A confirmation screen
will appear asking you to select
a power down option.
3
Spode QRG.book Page 4 Tuesday, May 13, 2003 10:51 AM