Xerox ApeosPort-III C7600, Руководство пользователя

Страница: 108 / 369

3 Copy
106
Copy
3
1
Use [ ] and [ ] to specify the height and
width ratios.
„ Width X/Length Y
Set the height and width ratios within the range from 100 to 400% in 1% increments.
„ Lock X - Y%
You can simultaneously change the numerical values of the height and width by the
same amount.
Repeat Image (Making Multiple Copies on One Sheet)
This feature allows you to copy a document image on one sheet of paper repeatedly
for a specified number of times.
When the copy ratio is set to [Auto], the repeated copies of the image are reduced to
fit on the selected paper. You can also specify how the repeated copies of the image
are arranged.
Note • When making copies at the same size as the document image, specify a number of repeats
so that the copies fit on the paper.
• If [Auto Paper Select] is set for [Paper Supply], the tray specified in [Auto Paper Off] is
automatically selected. Change the settings if necessary. For information on [Auto Paper
Off], refer to "5 Tools" > "Copy Service Settings" > "Copy Control" in the Administrator
Guide.
1
Select [Repeat Image].
2
Select any item.
„ Off
Disables this feature.
„ Auto Repeat
Automatically determines the number of copies according to the document size, paper
size, and copy ratio, and then repeatedly copies the document image onto the paper.
Note • Copies cannot be made when the document image is larger than the specified paper size.
„ Variable Repeat
Specify how many copies to place along each of the long and short edges of paper.
You can specify a value between 1 and 23 for the length in the Y direction and a value
between 1 and 33 for the length in the X direction.