Xerox AltaLink B81 Series, Руководство пользователя

Страница: 367 / 404

produce the first print after it exits Sleep Mode, than it takes to print in Ready mode. This delay is the
result of the printer that wakes up and is typical of most imaging devices on the market.
To save power, you can configure Energy Saver modes. The following options are available:
• Job Activated : The device wakes when it detects activity. To set the delay before the device enters
Sleep Mode, enter the number of minutes.
• Sleep and wake up at scheduled times : The device wakes and sleeps according to a schedule
that you specify.
• Auto Power Off : To allow the device to power off after a period of time in Sleep Mode, select Auto
Power Off. To set the delay before the printer powers off from the Sleep Mode setting, enter the
number of hours.
To change the Energy Saver mode settings, refer to the System Administrator Guide at www.xerox.
com/office/ALB81XXdocs . For further assistance, contact your System Administrator.
To learn more about Xerox participation in sustainability initiatives, go to: www.xerox.com/
environment or www.xerox.com/environment_europe .
Note:
• Energy Saver cannot be deactivated.
• Changing the default Energy Saver activation times can result in an overall higher energy
consumption of the device. Before you set a long activation time for Energy Saver modes,
consider the increase in device power consumption.
Default Energy Saver Settings
This device is ENERGY STAR ® -qualified under the ENERGY STAR Program Requirements for Imaging
Equipment. The transition time from Ready mode to Sleep mode can be set from 0–60 or 0–120
minutes, depending on printer model. The default value is set to 0 minutes. The maximum transition
time from Ready mode to Sleep mode can take up to 120 minutes, depending on printer model.
To change the Energy Saver settings, contact your System Administrator, or refer to the System
Administrator Guide at: www.xerox.com/office/ALB81XXdocs
EEuurraassiiaann EEccoonnoom miicc C Coom mm muunniittyy C Ceerrttiiffiiccaattiioonn
Russia, Belarus, and Kazakhstan are working to establish a common customs union,
the Eurasian Economic Community, or EurAsEC. The Eurasian Economic Community
members anticipate sharing a common regulatory scheme and common EurAsEC
certification mark, the EAC Mark.
RReegguullaattoorryy IInnffoorrm maattiioonn ffoorr 22..44--G GH Hzz aanndd 55--G GH Hzz W Wiirreelleessss N Neettw woorrkk
A Addaapptteerrss
This product contains a 2.4-GHz and 5-GHz Wireless LAN radio transmitter module that complies with
the requirements specified in FCC Part 15, Industry Canada RSS-210, and European Council Directive
2014/53/EU. Radio Frequency (RF) output power of this device does not exceed 20 dBm in either
frequency band.
Operation of this device is subject to the following two conditions:
Xerox ® AltaLink ® B81XX Series Multifunction Printer
User Guide
367
Regulatory Information