Xerox 6100BD - Phaser Color Laser Printer, Руководство пользователя

Страница: 11 / 168

System Hardware
DT6180 HandyBook 11
Paper Path Areas
The numbers in figure 4-6 identify the following paper path are as follows:
•
Areas 1 to 4 - The stock leaves a paper tray and is fed to the photoreceptor.
•
Areas 5 to 10 - The system prints an image on one side of the stock. If the job requires
2-sided printing, the system turns the page over and feeds it back to the photoreceptor.
•
Areas A to H - This is the interposer area. Paper travels through this area if paper is fed
from trays 1, 4 or 5 and also to pass paper from area 10 (through F and H) to the finisher.
•
Areas 11 and 12 - If the prints are to be fed to the top tray, the system delivers the prints
through the top tray slot.
•
Areas 13 to 16 - The prints enter the bindexer and are collated, if desired.
•
Areas 17 to 19 - The prints are stitched in area 17, or bound in area 18, if desired, and
placed on the stacker in area 19.