Xerox 6100BD - Phaser Color Laser Printer, Руководство пользователя

Страница: 153 / 168

Programming Features
DT6180 HandyBook
153
8. Programming Features
Add Binding to a Job
NOTE: You must be logged in as System Administrator or Trusted User to perform this task.
To Add Binding to a job in the Job Queue using DocuSP software version 3.x:
1. From the DocuSP for DocuTech 2000 Series 61xx window, select [Job Manager].
2. Right-click the job you want to add binding to. A menu will be displayed.
3. Select [Properties]. A Job Properties window will be displayed.
4. Select the [Output] tab.
5. Under
the Finishing section, select [Bind] from the drop-down menu.
6. Select [OK].
To Add Binding to a job in the Job Queue using DocuSP software version 2.x:
1. From the DocuSP Print Services window, select [Job Manager].
2. Select the job you want to add binding to.
3. Select [Properties] from the toolbar. A menu will be displayed.
4. Select [Output]. An Output window will be displayed.
5. Under
the Finishing section, select [Bind] from the drop-down menu.
6. Select [OK].
Enable Duplex Mode
NOTE: Before you begin you must be logged on as a System Administrator or Trusted User.
To enable Duplex Mode:
1. If you are using DocuSP software version 2.x or below, open the DocuSP Print Services
window, and select [Print Manager]. The Print Manager window will be displayed.
If you are using DocuSP software version 3.x, open the DocuSP for DocuTech 2000
Series 61xx window, and select [Printer] from the toolbar. A menu will be displayed. Skip
to step 3.
2. Select [Options] from the toolbar. A menu will be displayed.
3. Select [Switches] from the menu. The Switches window will be displayed.
4. Under
Sides Imaged , select [2-Sided]. A check mark will be displayed in the box when
the feature is enabled.
5. Select [OK] to save changes and exit.