Xerox 4890 Advanced, Настройка

Страница: 69 / 134

SETTING THE SYSTEM CONFIGURATION
XEROX DOCUPRINT 4850/4890 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 4-13
4. From the Trace Mode pull-down menu, select Execute Trace.
The Default Trace File Name prompt window displays.
5. On the Default Trace File Name window, enter the following
path:
/var/db/palettename
where palettename is the file name of the palette you want to
print (such as royal2_palette.trace).
6. Click Apply. The system prints ten copies of the specified
palette.
7. After printing has completed, select Normal Operation from the
Trace Options window.
Rotating the page origin
If you want to print a job that was designed for a continuous forms
printer, you can enable the job to print on the cut-sheet IPS printer by
rotating its page origin 90 degrees. When you do this, the IPS
emulates a continuous forms printer while printing on cut sheets.
Example: Suppose you wanted to print a continuous forms job
designed for 17 by 11-inch (or possibly A3) paper on your IPS, which
uses cut sheets.
•
The page or text origin is always in the upper-left corner of the
printed page.
•
For continuous forms printing, the longest edge (17 inches)
is the top edge. (See the illustration below.)
For cut-sheet printing, the short edge (11 inches) is the top
edge. (See the illustration below.)
For the page to print correctly in portrait orientation on the IPS cut
sheets, its text origin must be rotated 90
o
, via the Continuous Forms
Emulation window.