XS26GS Managed Optical Ethernet Switch User Manual
144
Description
Use
spanning-tree priority
command to set a port priority for the specified ports.
Use
no spanning-tree priority
command to restore to the default priority of the
specified ports.
Examples
XS(Ethernet0/1)#
spanning-tree priority
200
Set successfully
spanning-tree point-to-point
Syntax
spanning-tree point-to-point
no
spanning-tree
point-to-point
View
Ethernet port view
Parameters
None.
Description
Use
spanning-tree point-to-point
command to specify that the links connected
to the specified Ethernet ports be point-to-point.
Use
no spanning-tree point-to-point
command to specify that the links
connected to the specified Ethernet ports be not point-to-point.
By default, the Ethernet ports are point-to-point links.
The rapid transition feature is not applicable to ports connected to
non-point-to-point links.
If an Ethernet port is the master port among aggregated ports or operates in
full-duplex mode, the link connected to the port is a point-to-point link.
Examples
XS(Ethernet0/1)#
no spanning-tree point-to-point
Set default value false
spanning-tree protocol-migration
Syntax
spanning-tree protocol-migration
no
spanning-tree
protocol-migration
View
Ethernet port view
Parameters
None.