XS26GS Managed Optical Ethernet Switch User Manual
126
Use
multicast static-router-port
command to configure the specified port in the
VLAN as a static router port.
Use
no multicast static-router-port
command to remove the specified port from
the VLAN as a static router port.
By default, a port is not a static router port.
Examples
XS(vlan2)#
multicast static-router-port ethernet
0/3
Succeed.
3.18
802.1x Configuration Commands
The “Any view” in the below table refers to anyone of the following: System view,
Ethernet port view, Port-based VLAN view, VLAN view, or dot1x view.
Command list
:
View
Command
Any view
show dot1x
{
status
|
interface
[
ethernet
interface
] }
System view
dot1x
dot1x view
end
dot1x view
max-req
dot1x view
timeout { quiet-period
quiet-period-value
|
reauth-period
reauth-period-value
|
server
server-timeout-value
|
supplicant
supp-timeout-value
|
tx-period
tx-period-value
}
no
timeout { quiet-period
quiet-period-value
|
reauth-period
reauth-period-value
|
server
server-timeout-value
|
supplicant
supp-timeout-value
|
tx-period
tx-period-value
}
dot1x view
system-auth-control
no
system-auth-control
dot1x view
radius-server host
host-ip-address
auth-port
auth-port-number
[ acct-port
acct-port-number
] key
key-string
Ethernet port view
dot1x
no dot1x
Ethernet port view
dot1x re-authentication
no dot1x re-authentication
Ethernet port view
dot1x port-control { auto | forceauthorized |
forceunauthorized }
show dot1x
Syntax
show dot1x
{
status
|
interface
[
ethernet
interface
] }
View
Any
view.
Parameters