XS26GS Managed Optical Ethernet Switch User Manual
70
Description
Use
xs-view
command to enable the XS View network management function.
Use
no
xs-view
command to disable the XS View network management function.
Examples
XS# xs-view
XS View function has been enabled successfully.
XS# no xs-view
XS View function has been disabled successfully.
3.8
Port Basic Configuration Commands
The “Any view” in the below table refers to any one of the following: System view,
Ethernet port view, Port-based VLAN view, VLAN view, or dot1x view.
Command list
:
View
Command
Any view
show interface [ ethernet
interface
]
Any view
show interface statistics [ ethernet
interface
]
Any view
show interface switchport ethernet
interface
Any view
show storm-control
System view
interface ethernet
interface
Ethernet port view
end
Ethernet port view
shutdown
no shutdown
Ethernet port view
speed { 10 | 100 | 1000 | auto }
no speed
Ethernet port view
duplex { auto | full | half }
no duplex
Ethernet port view
flow-control
no flow-control
Ethernet port view
learning
no learning
Ethernet port view
line-rate { egress | ingress } rate
rate-value
no line-rate { egress | ingress }
Ethernet port view
jumboframe
no jumboframe
System view
storm-control type
type
rate
rate
no storm-control
show interface
Syntax
show interface [ ethernet
interface
]
View
Any view.
Parameters
