![background image](http://html1.mh-extra.com/html/xenya/xs26gs/xs26gs_user-manual_3274837014.webp)
XS26GS Managed Optical Ethernet Switch User Manual
9
Lacp Status Setting
– sets LACP active or passive for each port
Active:
The port automatically sends LACP protocol packets.
Passive:
The port does not automatically send LACP protocol packets; it responds only
if it receives a LACP protocol packet from the opposite device.
A link having either one or two active LACP ports can perform dynamic LACP trunking. A
link has two passive LACP ports that will not perform dynamic LACP trunking as both
ports are waiting for LACP protocol packet from the opposite device.
2.4.3
Port Bandwidth
This page sets the ingress and/or egress rate limit for each port.
Port
: the port for which the rate limit is configured.
Ingress
: the desired ingress rate limit to be configured. Choose “disabled” to set the
port with no ingress rate limit, which means the port will run in full speed for ingress
traffic.
Egress
: the desired egress rate limit to be configured. Choose “disabled” to set the port
with no egress rate limit, which means the port will run in full speed for egress traffic.
When completing a configuration, click <apply> to take effect.
The bottom part of this page shows a full list of rate limit for each port.