![background image](http://html1.mh-extra.com/html/xenya/xs26gs/xs26gs_user-manual_3274837100.webp)
XS26GS Managed Optical Ethernet Switch User Manual
95
View
VLAN view.
Parameters
vlan-id
: specifies the ID of a VLAN the information of which is to be created, in a
range from 1 to 4094.
vlan-id1
: specifies the ID of a VLAN the information of which is to be deleted, in the
range of 1 to 4094.
to
vlan-id2
: in conjunction with
vlan-id1
, defines a VLAN range to delete
information of all existing VLANs in the range. The
vlan-id2
argument takes a value
in the range of 1 to 4094, and must not be less than that of
vlan-id1
.
Description
Use
show igmp-snooping
command to display the igmp snooping configuration
for the specified VLAN group.
Examples
XS(vlan5)# show igmp-snooping vlan 5
show igmp-snooping configuration on vlan 5
Igmp-snooping state: Enabled
VLAN route interface:
Ethernet0/7
Ethernet0/8
switchport pvid
Syntax
switchport pvid
vlan-id
no switchport pvid
View
Ethernet port view
Parameters
vlan-id
: specifies the default VLAN ID of the port, in a range from 1 to 4094.
Description
Use
switchport pvid
command to set the default VLAN ID for the port. A trunk port
sends packets of the default VLAN untagged.
Use
no
switchport pvid
command to restore the default.
By default, the default VLAN ID of a port is VLAN 1.
Examples
XS(Ethernet0/9)#
switchport pvid
5
Setting successfully
switchport link-type
Syntax