XS26GS Managed Optical Ethernet Switch User Manual
30
2.9.2.2
Advanced IP ACL
This page sets ACL rules based on
packet Src IP Address, Dst IP Address, IP Protocol type and
other protocol features, such as TCP or UDP source port, destination port, ICMP protocol
message types etc.
Rule ID:
identification of the ACL rule.
Protocol Type:
an existing protocol type such as Icmp, igmp, Udp, Tcp, Ospf, or an
interger between 1 and 255.
Src IP Address:
source host IP address.
Src IP Mask:
source host IP subnet mask.
Src L4 Port:
TCP/UDP source port, an existing Echo, Frp, telnet, Smtp, WWW, or an
integer between 1 to 65535. It can be set only when protocol type is TCP or UDP.
Note: IETF IANA defines three groups of ports: Well Known Ports (0-1023), Registered
Ports (1024-49151), and Dynamic and/or Private Ports (49152-65535).
Dst IP Address:
destination host IP address.
Dst IP Mask:
destination host IP subnet mask
Dst L4 Port:
TCP/UDP destination port, an existing Echo, Frp, telnet, Smtp, WWW, or an
integer 1-65535. It can be set only when protocol type is TCP or UDP.
Action:
permit or deny access of the package with matched rules
.
The bottom part of this page lists all configured Advanced IP ACL rules.
