WiOS
- 30 -
Base Unit
To remove power from the Base Unit by unplugging port 1
Place Dip Switch 1, in the up position, turning if off, while leaving switches 2 and 3
in the down position, turning them on.
Switches follow the white squares
, See
below:
Note: The LED will flash in the “Registration Mode” Cadence (125 milliseconds on, 125
milliseconds off). Dipswitch 1 is off (up) and Dipswitches 2 and 3 are on (Down), which takes
about five (5) seconds.
Plug port 1 in – restoring power to the base unit
Wait 5 seconds – the LED begins flashing rapidly. For the next 30 seconds, while
the LED is rapidly flashing, PRESS THE “OK” (F3) BUTTON on the Handset.
((
))
REGISTERING
PLEASE WAIT...
If successful, the handset will update:
((
))
> REGISTERED
HANDSET # 1
Note: If Handset 2 is being register the display will say “HANDSET #2”
The display shows that the handset is now on line:
((
))
JAN01 TUE 4:14
NAME 12
1 2 3
ON
WiOS
-
15 -
Operation
Cadence
Normal Operation
500 milliseconds on, 500 milliseconds off
Transition Mode
1000 milliseconds on, 1000 milliseconds off
(De) Register Mode
125 milliseconds on, 125 milliseconds off
e.
Handset Registration
WiOS
comes with a Base Unit is factory registered and should be
operational right out of the box. If the handset does not become
operational, please see the troubleshooting section for directions
to manually register the handset.
REGISTERED
a
HANDSET # 1
