WiOS
- 32 -
De-registering a Handset
ON occasion a handset needs to be de-registered. This would happen if the handset
were going to be used on the different base unit. There are two methods for de-
registering handsets: From the base unit using the dipswitches all handsets or the
individual handsets can be De-register or from the handset, each can be de-register
individually.
Handset
While in the programming mode, select the “De-registration” parameter:
((
))
> DE-REGISTER
VIBRATION
Press (F1) or (F2) to toggle between “No” and “Yes”, press “OK” (F3) when the
desired answer is in the display.
((
))
DE-REGISTER
NO?
A
((
))
DE-REGISTER
YES?
Select “No” to back out of this area without de-registering the handset. Select “Yes”
to de-register the handset. The display will update:
((
))
> DE-REGISTER
PLEASE WAIT…
If it is successful the display will update:
((
))
PLEASE
REGISTER
WiOS
-
13 -
Wall Mount
The Wireless Base Unit can be surface or wall mounted. The wall mount kit is a
standard wall place mounting bracket and the antenna can be kept straight for wall
mount, or bent at a 90 degree angle for surface mounting
