X8222r User’s Manual Version 1.0
- 10 -
V. Hardware
Installation
1. Connect one end of the ADSL cable to the WAN port of
X8222r
and the other end to the ADSL wall outlet.
2. Use a RJ-45 cable to connect one end to the Ethernet
port of
X8222r,
and the other end to the LAN or a PC
with an Ethernet adapter installed.
3. Plug the AC adapter into the AC power socket, and
then connect the DC jack to the PWR inlet of
X8222r
.
Note:
Be sure to use a RJ-45 crossover cable while connecting to a hub.
3
Power Supply
ADSL Outlet
1
2
Management
Terminal/PC
X8222r User’s Manual Version 1.0
- 11 -
VI. Management
Local Ethernet Port (web-browser)
– connect the
Ethernet port to your local area network or directly to a PC.
Launch your web browser and enter default local Ethernet
IP address “192.168.1.1” into the address bar.
Note
: As operating an ADSL device requires technical know-how and
experience, it is recommended that only qualified technical staff be
allowed to manage
X8222r
. Therefore, a password authentication is
required when you enter the Web interface. See the
Default Values
section to obtain the password.
