Xantrex Truecharge TC1012, Руководство пользователя, Страница: 41 / 80

Charging Batteries
975-0401-01-01 2–9
The batteries can be in one of eight different modes which
will be indicated on the onboard display in the Charger Status
LEDs:
After charging is complete, the Truecharge™ 2 Battery
Charger enters into one of these modes:
Float mode When the ready and charging indicator LEDs
both illuminate, all batteries are fully charged and ready for
use. If you selected the three-stage charging mode, the
Truecharge™ 2 Battery Charger is in float mode and will
maintain the batteries’ charge.
Rest mode Or Standby mode. If you selected the two-stage
charging mode, the ready indicator LED shows the charger is
now in rest mode and is checking battery voltage and elapsed
time since the last charge cycle.
With either charging mode, the Truecharge™ 2 Battery
Charger will begin a charging cycle 21 days after the last
completed cycle, or when battery voltage drops to below
12.5 V (12 V chargers) or 25 V (24 V chargers) for 15
minutes.
Mode Charger Status LED—ON
Bulk Charging
Absorption Charging
Rest (two-stage charging) Ready
Float (three-stage charging) Ready and Charging
Equalize (in progress) Equalize (solid light)
Equalize (waiting for absorption to end) Equalize (flashing)
Fault
Fault
a
(solid light)
a.In combination with one or more flashing Charging Output % LEDs.
Warning
Fault
a
(flashing)
TC2 Series BattChg Owners Guide.book Page 9 Tuesday, July 1, 2008 11:55 PM