background image

VAGABOND MINI

TM

L I T H I U M

VAGABOND MINI™ LITHIUM

QUICK START GUIDE:

 

1. CHARGE the battery.

We recommend charging the battery as soon as the system is unboxed. You 

will charge the battery using the provided VMC3A battery charger. First, plug 

the charger’s two-pronged AC power cord into a suitable AC power source (the 

LED on the battery charger will shine green to indicate the connection). Next, 

connect the charger to the 

Vagabond Mini™ Lithium

 using the cord with the red 

and black Anderson connectors. Insert the connectors red-to-red and black-

to-black in the Anderson sockets located on the faceplate of the unit (labeled 

“CHARGER”). The LED on the battery charger will shine 

RED

 while the battery is 

charging and shine 

GREEN

 to indicate that the battery is fully charged (note: this 

LED is on the battery charger, NOT on the inverter). Although the system arrives 

with the battery connected to the inverter, you may also charge the battery (or 

an external spare battery) by plugging the charger directly into the connectors 

on the battery itself. See pages 8 - 11 to learn more.

 

2. CONNECT your flash units.

Plug one or two flash units into the AC power outlets located on the front panel 

faceplate, or connect up to four units by using a multi-outlet extension cord or 

power bar. 

Note:

 

Always use grounded outlets and extension cords.  Depending 

on the type of flash units and power settings used, you may be able to success-

fully power up to four flash units.

 

3. TURN ON the Vagabond Mini™ Lithium system.

Turn your system ON with the ON / OFF power switch.

 

4. TURN ON the connected flash units.

Turn on each flash unit / power pack in your setup normally, using the ON / OFF 

power switch on each individual unit.

 

5. TURN OFF the MODELING LAMP(S) in your flash units.

Modeling lamps should generally be turned off when used with 

Vagabond Mini™ 

Lithium

, as the continuous current draw of modeling lamps will quickly deplete 

the battery and will increase recycle times or may cause the inverter to overheat 

or shut down. See the 

WARNINGS

 section on the following page for more.

Please be sure to read the entire product manual to ensure safe use of equipment.

The Vagabond Mini

TM

 Lithium is a PAUL C. BUFF, INC.

TM

 product  •  www.PAULCBUFF.com

2725 Bransford Avenue  Nashville, Tennessee  37204  •  Toll Free 1-800-443-5542

v. 01/2015

Summary of Contents for Vagabond Mini Lithium

















Reviews: