Xantrex Truecharge TC1012, Руководство по установке, Страница: 31 / 74

Remote Panel (Sold Separately)
975-0402-01-01 1–17
This guide for use by qualified installers only
3 Charger Status LEDs
Displays the present status of the charger.
•
Ready - a solid light indicates that all batteries are fully charged
and in rest stage.
• Ready and Charging - solid lights indicate that batteries are fully
charged and in float stage.
• Charging - a solid light indicates that the charger is performing a
normal charge cycle.
• Equalize - a solid light indicates that the charger is performing an
equalization cycle.
- a flashing light indicates that the equalization cycle
will begin after the absorption stage is done.
4 Battery Status LEDs
Displays the present status of each battery (or each battery bank).
Each row represents the battery (or battery bank) number
designation—
1 , 2 , or 3 . Each column represents Low, Medium, or
Full battery capacity.
NOTE: This feature is available only on the Remote Panel.
5 Status Button
• Press and hold to enter or exit Setup Mode.
• When in Setup Mode: Press to select the Battery Temperature :
Cold, Warm, or Hot.
• When setting or cancelling an Equalization program: Press and
hold both the Status and
ON
/
STANDBY
buttons.
6 Fault/Warning LED
The LED displays a solid light to indicate a fault condition or flashes
intermittently in combination with a flashing Charging Output (%)
LED to display a warning condition (6a). See Table 1-1, “Fault and
Warning Indicators” on page 1–11 for details.
7 Set Max Output Button
• Press to select the desired maximum charging output current.
NOTE: This feature is available only on the Remote Panel.
• When in Setup Mode: Press to select the Battery Type : AGM,
Flooded, GEL, Lead-Calcium/OEM
8 Max. Output (%) LED
The LED illuminates a solid light corresponding to the Maximum
Charger Output % setting.
Item Description
TC2 Series BattChg Install Guide.book Page 17 Monday, June 30, 2008 3:18 PM