Xantrex Truecharge TC1012, Руководство по установке, Страница: 10 / 74

Safety
viii 975-0402-01-01
This guide for use by qualified installers only
4. If battery acid contacts skin or clothing, wash
immediately with soap and water. If acid enters your eye,
immediately flood it with running cold water for at least
twenty minutes and get medical attention immediately.
5. Never smoke or allow a spark or flame near the engine or
batteries.
6. Use extra caution to reduce the risk or dropping a metal
tool on the battery. It could spark or short circuit the
battery or other electrical parts and could cause an
explosion.
7. Remove all personal metal items, like rings, bracelets,
and watches when working with batteries. Batteries can
produce a short circuit current high enough to weld metal
to skin, causing a severe burn.
8. If you need to remove a battery, always remove the
ground terminal from the battery first. Make sure all
accessories are off so you don’t cause an arc.
9. Never charge a frozen battery.
PREPARING TO CHARGE
10. Make sure the area around the battery is well ventilated.
11. Make sure the voltage of the batteries matches the output
voltage of the battery charger.
12. Clean battery terminals. Be careful to keep corrosion
from coming into contact with your eyes and skin.
13. Study and follow all of the battery manufacturer's
specific precautions, such as removing or not removing
cell caps while charging, whether equalization is
acceptable for your battery, and recommended rates of
charge.
14. Add distilled water in each cell until battery acid reaches
the level specified by the battery manufacturer. This
helps to purge excessive gas from cells. Do not overfill.
For a battery without removable cell caps, carefully
follow manufacturer's instructions.
TC2 Series BattChg Install Guide.book Page viii Monday, June 30, 2008 3:18 PM