XAG P100 2022, Руководство по эксплуатации для пилотов

Страница: 53 / 145

53
XAG AUSTRALIA
01. Connect the Charger Plug to the Battery.
02. Power ON the device to Start Battery Charging.
📖
INSTRUCTION
√ ENSURE there are no liquid or foreign matter on the battery terminal, wipe and clean in a timely
fashion. Otherwise, it may cause poor contact, resulting in loss of power or charging failure.
√ ENSURE pure water is used for heat Dissipation.
√ ENSURE Battery & Chargers is placed on even ground with no nearby combustible materials.
√ ENSURE Batteries have a minimum of 30cm distance between the batteries and Chargers
during Charging.
√ ENSURE Water level should be kept between the Minimum and Maximum Water levels to
achieve the best heat dissipation effect.
X DO NOT exceed the Max. Water level or Submerge the Battery in Water, or Battery will be
damage.
X DO NOT use Corrosive liquids for heat Dissipation, or Battery will be damage.
X DO NOT exceed 60 minutes for heat Dissipation, or Battery will be damage.
X DO NOT clean the charging device with alcohol or other combustible liquids.
🧷
IMPORTANT
The battery management system will automatically suspend the charging if the temperature is over
55° C, and resume after the temperature drops below 55° C. The ideal ambient charging temperature
(20° C to 35° C) for charging helps maintain the normal service life of the battery.
The battery level indicators corresponding to the current battery level will be solid green, and the
remain will be flashing in series indicating the battery is currently charging. Once the charging is
completed, the buzzer will beep for 30 secs and all the battery level indicators will flash for 2 minutes,
then the battery will turn off automatically.
Battery Charging